Description of Full-Automatic Suppository Manufacture Group
1. The production speed of this newly-designed GY-Z type fully automatic suppository filling and sealing machine set reaches as high as above 20,000 grains per hour;
2. Carry strip uninterrupted movement;
3. The number of detached board severing can be adjusted discretionarily, thus satisfying each kind of specification suppository variety and various types single dosage product.
Working principle of Full-Automatic Suppository Manufacture Group
1. Rolls of the packing membrane will enter into filling procedure automatically after making a statue to take shape by the machine, and then already stirred equally medicine fluid is filled into the cavities through metering pump.
2. The semifinished products will be entered into condenser to lower down the temperature, in certain time through the cooling system cause the medicine fluid to coagulate.
3. Then the suppository granules will enter into seal phase, simultaneously reshaping, beating batch number and further shearing to take shape.
4. At last, the line of small suppository granules will be sheared into segments according to the length preestablished.
Characteristics of technology
1. The adaptability of filling and sealing machine set is broad, thus allowing to pour into more sticky ground substance and the Chinese traditional medicine product.
2. High automatization degree is achieved due to the adoption of PLC programme control.
3. The mechanical, electrical and gaseous integration structure allows it to operate expediently and run steadily.
4. It has a unique cooling mode. Suppository strip runs continuously without interruption.
5. More artistic seal and clearer batch number are available.
6. The capacity of ejecting the disqualification products brings a higher rate of finished products.
Technical parameters of Full-Automatic Suppository Manufacture Group
1. Output: 15000~18000 grains/h
2. Single Dosage: 0.5~5mL
3. Number of Filling Nozzles: 9~12 Nozzles
4. Capacity of Tank: 50L
5. Allowable Error of Dosage: ±1%
6. The voltage of the power: 380V Three-phase AC
7. Total power: 12KW
8. Atmospheric Pressure: 0.6Mpa
9. Air Consumption: 0.9m3/min
10. Water Quantity: 800kg/h (Circulating Usage)
11. Total Weight: 2550kg
12. Overall Dimension: 6650 x 2040 x 2370mm(Long x Wide x High)
13. Adaptable Substance: Synthetic Fatty Glyceride, Glycerogelatin, Polyethylene Glycol, and the like.
14. Suppositories Shape: Bullet, Torpedo, Duck Mouth Shape and other special forms.